Designed for mental health settings, this anti-ligature PVC wall cladding ensures safety with reduced-ligature joints and hospital wall protection.
Designed for mental health settings, this anti-ligature PVC wall cladding ensures safety with reduced-ligature joints and hospital wall protection.
Why choose Diamond Safe?
Attack-resistant
Attack-resistant
SafeJoint PVC withstands sustained attack for over 25 minutes, engineered for secure environments.
DoH tested
DoH tested
Tested to DoH Environmental Design Guide for Adult Medium Secure Services, Annexe B, Levels 1–4.
No edge joints
No edge joints
Thermoformed on site, Diamond Safe clads corners and reveals without an edge joint or harbour point.
Fire rated
Fire rated
Achieves BS476 Part 7 Class 1 and EN13501 Bs3d0, meeting fire performance requirements with confidence.
Low VOC
Low VOC
BRE-tested to ISO 16000, formaldehyde, vinyl chloride and heavy metal migration all low or non-existent.
Approved safe joint
Approved safe joint
SafeJoint is the first and only hot-welded joint approved for use in secure environments.
The SafeJoint system
SafeJoint is the first and only hot-welded anti-ligature joint approved for use in secure environments, withstanding sustained attack for over 25 minutes and tested to DoH Environmental Design Guide, Adult Medium Secure Services (2011), Annexe B, Levels 1 to 4.
Built for secure environments
Colour-matched and hot-welded, SafeJoint incorporates anti-penetration reinforcement tested to DoH Environmental Design Guide Levels 1 to 4. The only joint of its kind approved for secure environments and installed exclusively by approved installers.
The SafeJoint system
SafeJoint is the first and only hot-welded anti-ligature joint approved for use in secure environments, withstanding sustained attack for over 25 minutes and tested to DoH Environmental Design Guide, Adult Medium Secure Services (2011), Annexe B, Levels 1 to 4.
Built for secure environments
Colour-matched and hot-welded, SafeJoint incorporates anti-penetration reinforcement tested to DoH Environmental Design Guide Levels 1 to 4. The only joint of its kind approved for secure environments and installed exclusively by approved installers.
Colours & finishes
Available in White, Ambience, Radiance and Resilience.
Sheet thickness
Extruded semi-rigid PVC.
x 1200
Max sheet size
Multiple standards available.
Max service temperature
Dimensionally stable surface finish.
Colours & finishes
Available in White, Ambience, Radiance and Resilience.
Sheet thickness
Extruded semi-rigid PVC.
x 1200
Max sheet size
Multiple standards available.
Max service temperature
Dimensionally stable surface finish.
Easy-to-clean
Wipe clean with mild detergent and warm water. Resistant to solvent cleaning for more demanding environments.
Chemical resistance
Trovex Diamond Safe's robust, non-porous surface offers excellent chemical resistance and dimensional stability, keeping walls intact in the most demanding environments.
Colours & finishes
Trovex Diamond Safe is available in over 45 colours across White, Ambience, Radiance and Resilience ranges.
Download the
product guide
Download the 2026 hygienic wall cladding systems product guide from Trovex today, or request a printed version.
Wall cladding
Download the
product guide
Download the 2026 hygienic wall cladding systems product guide from Trovex today, or request a printed version.
Download the
product guide
Download the 2026 hygienic wall cladding systems product guide from Trovex today, or request a printed version.
Frequently asked questions
Frequently asked questions
PVC wall cladding is a hygienic wall protection system comprising rigid PVC sheets installed over existing wall surfaces to create durable, water-resistant, and easy-to-clean protective barriers. Trovex PVC wall cladding is engineered for healthcare, mental health, leisure, and commercial environments where infection control, impact resistance, and long-term durability are essential.
The system features non-absorbent construction preventing water penetration and bacterial colonisation, creating seamless hygienic surfaces that withstand repeated cleaning with hospital-grade disinfectants including chlorine-based products and alcohol wipes. Chemical-resistant surfaces resist stains, cleaning easily without compromising material integrity. All Trovex wall cladding systems resist impact and wear, maintaining smooth surfaces despite heavy traffic. The material resists fading and staining, maintaining colour throughout service life backed by a 20-year warranty covering both cladding systems and adhesives.
PVC wall cladding offers advantages over traditional wall finishes including painted walls, ceramic tiles, and standard wall coverings. Key benefits include superior hygiene performance, reduced lifecycle costs, faster installation, enhanced durability, and minimal maintenance requirements compared to conventional alternatives.
PVC wall cladding delivers 20+ years of service life in healthcare environments, significantly exceeding traditional painted walls or standard wall finishes. Trovex provides a 20-year warranty covering both cladding systems and adhesives, providing estates teams with lifecycle cost certainty.
PVC wall cladding achieves hygienic performance through non-porous surfaces preventing bacterial penetration, seamless or heat-welded joints eliminating pathogen harbour points, chemical resistance withstanding hospital-grade disinfectants, smooth finishes enabling effective cleaning, and durable construction maintaining surface integrity throughout extended service life. Trovex PVC cladding specifically addresses infection prevention and control requirements in healthcare environments.
Hygiene benefits derive from material characteristics and system design: non-absorbent PVC construction prevents moisture penetration that could support bacterial or fungal growth; smooth, non-porous surface finish provides no texture where microorganisms could colonise; chemical resistance enables repeated cleaning with aggressive disinfectants including sodium hypochlorite solutions, quaternary ammonium compounds, hydrogen peroxide, and alcohol-based products without surface degradation; and seamless installation or heat-welded joints create continuous surfaces with minimal crevices compared to traditional tiled walls with grout lines.
PVC wall cladding cleaning involves routine wiping with hospital-approved disinfectants, periodic deep cleaning using non-abrasive cleaning products, and inspection for damage or joint degradation. Trovex PVC cladding is designed for low-maintenance performance, withstanding frequent cleaning cycles without surface deterioration whilst maintaining hygienic standards.
Routine cleaning protocols follow standard healthcare environmental cleaning procedures: daily or shift-based disinfection of high-touch areas using hospital-approved disinfectant solutions applied with microfibre cloths or disposable wipes. The chemical-resistant surface withstands chlorine-based disinfectants, quaternary ammonium compounds, hydrogen peroxide solutions, and alcohol wipes without degradation, discoloration, or surface damage. Cleaning technique involves wiping from clean to dirty areas using systematic approaches ensuring complete surface coverage, avoiding abrasive scourers or harsh mechanical cleaning that could scratch surfaces creating bacterial harbour points.
PVC wall cladding is a hygienic wall protection system comprising rigid PVC sheets installed over existing wall surfaces to create durable, water-resistant, and easy-to-clean protective barriers. Trovex PVC wall cladding is engineered for healthcare, mental health, leisure, and commercial environments where infection control, impact resistance, and long-term durability are essential.
The system features non-absorbent construction preventing water penetration and bacterial colonisation, creating seamless hygienic surfaces that withstand repeated cleaning with hospital-grade disinfectants including chlorine-based products and alcohol wipes. Chemical-resistant surfaces resist stains, cleaning easily without compromising material integrity. All Trovex wall cladding systems resist impact and wear, maintaining smooth surfaces despite heavy traffic. The material resists fading and staining, maintaining colour throughout service life backed by a 20-year warranty covering both cladding systems and adhesives.
PVC wall cladding offers advantages over traditional wall finishes including painted walls, ceramic tiles, and standard wall coverings. Key benefits include superior hygiene performance, reduced lifecycle costs, faster installation, enhanced durability, and minimal maintenance requirements compared to conventional alternatives.
PVC wall cladding delivers 20+ years of service life in healthcare environments, significantly exceeding traditional painted walls or standard wall finishes. Trovex provides a 20-year warranty covering both cladding systems and adhesives, providing estates teams with lifecycle cost certainty.
PVC wall cladding achieves hygienic performance through non-porous surfaces preventing bacterial penetration, seamless or heat-welded joints eliminating pathogen harbour points, chemical resistance withstanding hospital-grade disinfectants, smooth finishes enabling effective cleaning, and durable construction maintaining surface integrity throughout extended service life. Trovex PVC cladding specifically addresses infection prevention and control requirements in healthcare environments.
Hygiene benefits derive from material characteristics and system design: non-absorbent PVC construction prevents moisture penetration that could support bacterial or fungal growth; smooth, non-porous surface finish provides no texture where microorganisms could colonise; chemical resistance enables repeated cleaning with aggressive disinfectants including sodium hypochlorite solutions, quaternary ammonium compounds, hydrogen peroxide, and alcohol-based products without surface degradation; and seamless installation or heat-welded joints create continuous surfaces with minimal crevices compared to traditional tiled walls with grout lines.
PVC wall cladding cleaning involves routine wiping with hospital-approved disinfectants, periodic deep cleaning using non-abrasive cleaning products, and inspection for damage or joint degradation. Trovex PVC cladding is designed for low-maintenance performance, withstanding frequent cleaning cycles without surface deterioration whilst maintaining hygienic standards.
Routine cleaning protocols follow standard healthcare environmental cleaning procedures: daily or shift-based disinfection of high-touch areas using hospital-approved disinfectant solutions applied with microfibre cloths or disposable wipes. The chemical-resistant surface withstands chlorine-based disinfectants, quaternary ammonium compounds, hydrogen peroxide solutions, and alcohol wipes without degradation, discoloration, or surface damage. Cleaning technique involves wiping from clean to dirty areas using systematic approaches ensuring complete surface coverage, avoiding abrasive scourers or harsh mechanical cleaning that could scratch surfaces creating bacterial harbour points.
